Model No.: CW-JL-Z3
Model: CW-JL-Z3
Specification: CW-JL-Z3/384.8 * 249.8 * 129PC operating version (Swipe the card)
Charging Mode: Swipe card, two-dimensional code scanning charge
Means Of Communication: Swipe card, Scan Code charge
The Length Of The Gun Line: 5M (optional non-standard length)
Human–computer Interaction: 4.3-inch TFT color LCD screen
Rated Voltage: Single-phase three-wire 220VAC
Rated Power: 7KW(220VAC)
Working Frequency: 45~65Hz
Protection Class: IP65
| Selling Units | : | Pack/Packs |
| Package Type | : | standard export packaging |
| Product Name | Charging Post Z3 7kw light guide column section |
| Model | CW-JL-Z3 |
| Specification | CW-JL-Z3/384.8 * 249.8 * 129PC operating version (Swipe the card) |
| Charging mode | Swipe card, two-dimensional code scanning charge |
| Means of communication | Swipe card, Scan Code charge |
| The length of the gun line | 5M (optional non-standard length) |
| human–computer interaction | RGB light strip |
| Rated Voltage | Single-phase three-wire 220VAC |
| Rated power | 7KW(220VAC) |
| Working Frequency | 45~65Hz |
| Max. Rated Current | 32A |
| Operating Temp | -40℃—+50C |
| Protection Class | IP65 |
| Number Of Jacks | New national standard 7 holes |
| General Standard | GB/T 18487.1-2015，GB/T34657.1-2017 |
| Warranty | One-year replacement, three-year warranty, lifetime maintenance |
| Protection function | Under-voltage, over-voltage, over-current, over-heat, short circuit, leakage, full automatic stop, ungrounded protection |
1.when installed in open-air places, it is recommended to be equipped with electrical boxes.
2. Make sure the ambient temperature is between -20 ° C and + 50 ° C. Keep away from open fires or baked goods and avoid high temperatures.
3. There should be no strong vibration, inflammable and explosive materials near the installation site, and good ventilation. Shall not be placed in corrosive, corrosive or humid air. Adequate space for cooling and ventilation must be reserved.
4. The installation shall not be located in low-lying areas or in areas prone to water accumulation. The installation site shall not be higher than 2000m above sea level.
5. bracket installation without wall support, it is recommended to use wall-mounted installation, if the use of floor-mounted bracket, fixed installation. Pile installation, should ensure that the pile vertical, and avoid vehicles may pass the route.
Overview:7kw AC Charging Pile ；Charging Pile ；Ac Charging Pile ；
Usage：1.Turn on the power, the device self-test is completed and the indicator light turns white, indicating that it is in a normal idle state.2.Connect the charging gun to the charging port of the electric vehicle, the indicator light is always on in blue, indicating successful connection.（If the swipe card is successful, there are two ticks to indicate success, if it fails, please swipe the card again）
2.Swipe to end charging：When charging, swipe the card again（there are two ticks to indicate successful card swipe）stop charging or press the button on the charging gun to stop charging.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now